DEGSON 8EDG-STDC-5.0 PLUGGABLE TERMINAL BLOCK
Quantity
| Item | Data | ||
| APPROVAL | - | ||
| Test standard | IEC61984 | ||
| Pitch [mm] | 5 | ||
| Poles | 2-24P | ||
| IEC61984 Test data | / | ||
| Rated voltage [V] | 320 | ||
| Rated current [A] | 20 | ||
| Rated connection capacity(solid/stranded) [mm2] | 0.2~2.5 | ||
| Surge voltage category/pollution degree/material group | III/3/I | ||
| Rated impulse voltage [KV] | 4 | ||
| Rated torque [N·m] | / | ||
| UL1059Test data | UL1059 | ||
| Use group | B | C | D |
| Rated voltage [V] | 300 | / | / |
| Rated current [A] | 15 | / | / |
| Rated connection capacity(solid/stranded) [AWG] | 22~14 | ||
| Rated torque [Lb. in] | / | ||
| General data | / | ||
| Screw | / | ||
| Inflammability class UL94 | V-0 | ||
| Ambient temperature [”ę] | -40~+105 | ||
| Relative humidity | 5%-95% | ||
| Inspection standard | MIL-STD-105E II | ||
| AQL | 0.65 | ||
| Warranty | 12 months | ||
| Material and plating | / | ||
| Housing | PA66 | ||
| Stainless spring | / | ||
| Contact | Copper alloy£¬Sn plated | ||
| Wire connecting | |||
| Recommended stripping length 7~8mm; | |||
| 1.£©For solid wire, stripping wire to the appointed length £¬ put the wire into the hole | |||
| after using the accessory depress the cage spring . | |||
| 2.£©For stranded wire: stripping wire to the appointed length, can be directly connected | |||
| or use of the corresponding standard insulated ferrule , then put the wire into the hole after | |||
| using the accessory press the cage spring . | |||
