DEGSON 8EDG-STDB-5.0 PLUGGABLE TERMINAL BLOCK
Quantity
Item | Data | ||
APPROVAL | - | ||
Test standard | IEC61984 | ||
Pitch [mm] | 5 | ||
Poles | 2-24P | ||
IEC61984 Test data | / | ||
Rated voltage [V] | 320 | ||
Rated current [A] | 20 | ||
Rated connection capacity(solid/stranded) [mm2] | 0.2~2.5 | ||
Surge voltage category/pollution degree/material group | III/3/I | ||
Rated impulse voltage [KV] | 4 | ||
Rated torque [N·m] | / | ||
UL1059Test data | UL1059 | ||
Use group | B | C | D |
Rated voltage [V] | 300 | / | / |
Rated current [A] | 15 | / | / |
Rated connection capacity(solid/stranded) [AWG] | 22~14 | ||
Rated torque [Lb. in] | / | ||
General data | / | ||
Screw | / | ||
Inflammability classUL94 | V-0 | ||
Ambient temperature [¡æ] | -40~+105 | ||
Relative humidity | 5%-95% | ||
Inspection standard | MIL-STD-105E II | ||
AQL | 0.65 | ||
Warranty | 12 months | ||
Material and plating | / | ||
Housing | PA66 | ||
Stainless spring | / | ||
Contact | Copper £¬Sn plated | ||
Wire connecting | |||
Recommended stripping length 7~8mm; | |||
For solid wire, stripping wire to the appointed length £¬ put the wire into the hole after using the accessory depress the cage spring . | |||
For stranded wire: stripping wire to the appointed length, can be directly connected or use of the corresponding standard insulated ferrule , then put the wire into the hole after using the accessory press the cage spring . |